HP9642 Membrane Panel - CAN Bus - NEW!!!!! - Please see Technical Manual V.2.4

The membrane panel is a supplement to our well known Powerbox, with this product its more simple to design your racecar, the panel is equipped with 12 buttons, each button has four functions - Momentary and Toggle. - NEW! Now you have also a possibility to make 2 stages on your output, first push A next B third off, or/and  A, A+B and off. Also we are now supporting Can speed 500Kbit and 1Mbit - Please see Technical Manual V.2.4 -

The CAN setting in the powerbox decides the function, this means you don't need to program the panel, its simply sents out the messages on the CAN, you decide in the powerbox which function you needs.

The panel is also equipped with 12 Green " on" Led's and 12 Red "Failure Led's, indicating

an on function or/and a channel failure.

Also a backlight is mounted, all buttons are then illuminated.

The Layout of the panel is open for your own layout sugestion, the text and logo is engraveable, included in the price, also there is space for drilling in special switches (on the top)

The Backlight and Leds can be dimmed from a can message -

Please note, the panel can be mounted "opposite" or Horisontal.

The size of the panel is 100mm x 183mm - only 11mm deep.

Below here is some examples of engraving of the panel.

Please keep in mind below the 9x Buttons, there is a free space for drilling in your special functions, could be Brake ballance, warning LED's or master switch buttons.