HP8443RAW

HP8443RAW

POWERBOX PCB – 16 Output – 12 Input – 52 CAN Input – 12/24v – 200A+ PWM

730,00 

Learn more below

  • Buy a PCB Board RAW without Connectors - Tested can calibrated for your own application.
Specification:
  • +200A load (PCB tested to +400A)
  • Voltage 12 & 24 Volt
  • Active voltage 5.7-32-volt DC
  • Minimum current consumption – 2.3 mA
  • Weight: 120 gram
16 Outputs an be controlled uo to 7 levels:
  • Overload
  • Load to Low
  • Short Circuit
  • Open Wire
  • Active Status
  • Error
  • Curent Reading
12 Inputs:
  • Toggle/momentary/latch
  • Negative Input
  • Positive Input
  • Analog Input
  • Pulse Input (PWM) max. 2Khz
Output Types:
  • High side (+ Output)
  • Low side (Gnd. Output)
  • PWM 10hz -2Khz (Pulse)
52 CAN Inputs:
  • 11bit
  • 29bit
  • Fully configurable
CAN Export:
  • 5 Levels of CAN Export
  • Fully Configurable CAN Export.
  • All Status´s export- Inputs, Outputs, Current, Status
  • Failures, Open Wire, Current, Temperature, and more
Special Functions:
  • CAN Monitor Build in - Logger.
  • Flash Timers
  • Delay Timers
  • PWM
  • Kill output function.
  • Start output Function.
  • Wiper Parking and logic
  • Virtual (Logical Inputs)
  • Error Log
  • Sequence Functions
  • Automatic Power Down
  • CAN Export of all statuses, inputs, outputs, current use, virtual, failure states.
  • Failure Output with Reset
  • Support for  Blink Marine, Greyhill and HP CAN Switch Panel
Warranty:
  • 15 Years
Software Updates:
  • Free of charge.

To order this product, please click here.

No data was found
Scroll to Top